Nested cutting lists, offcut policy and kiln losses - how yield engineering keeps lounge chairs prices stable.
Yield starts at the board
The price of a lounge chair frame hides a cutting list. How parts are nested on the board decides how much of the timber becomes product and how much becomes shavings - and yield is engineered, not hoped for.
The frame is a substrate for upholstery, so sections run lighter than a dining chair: 30 to 40 mm on the load-bearing rails, with a shaped ply or a webbed deck carrying the seat. Timber here is dried for stability rather than for appearance — most of it is never seen.
The timber here is mostly hidden, so the programme runs ash and rubberwood on cost and stability rather than on figure. In this category the species conversation is about the cover, not the frame.
Cutting lists are nested per model
Parts are nested by length and grain direction before the saw runs. The offcut policy is written: what is kept, what is binned, and what goes to smaller parts of other models.
Most of the frame here is machined for fit rather than for appearance: rails at 30 to 40 mm, a shaped ply or webbed seat deck, and no exposed joinery worth naming. Tolerance matters where the cover meets the frame, not where the eye looks.
| Stage | Control | Result |
|---|---|---|
| Cutting | Nested parts lists | Yield engineered per model |
| Offcuts | Written policy | Kept, reused or binned |
| Cloth | Nested markers | Fabric waste controlled |
| Kiln degrade | Metered | Feeds timber selection |
| Packing | Right-sized cartons | Freight is waste too |
Where waste lives
Cloth gets the same treatment
Upholstery covers are nested markers for the same reason - fabric waste is money too, and the marker is the difference between a competitive quote and a fat one.
Foam density is the specification that matters: 30 to 35 kg/m³ for a lobby, lower for a showroom piece. Covers are velvet, fabric or leather, and where the market requires it we can supply to BS 5852 or CAL 117 — specify at quotation, not after.
Kiln losses are counted
Drying is not free of losses; degrade is metered and fed back into timber selection so the next batch buys better.
Upholstered frames are dried for stability rather than for looks: a rail that moves inside a cover shows as a wrinkle or a split seam instead of a crack, and it is far harder to diagnose afterwards. This stock is held to the tighter end of the band.
Why waste control is the buyer's business
A factory that controls yield quotes stable prices across orders. One that doesn't quotes whatever the offcut bin looks like that week.
The bulky end of the catalogue: 0.22 to 0.34 m³ per carton, one piece, fully assembled. Freight dominates the landed cost, which is why buyers consolidate them with flatter models. MOQ is 4 pieces, and 2 on some models.
The catalogue lists 225 models in this category: 1% on a solid or wood frame and 99% with an upholstered or soft cover.
Reference
Questions
Does yield affect my price?
Directly. A nested cutting list is why repeat orders hold their price instead of drifting up.
Can I buy the offcuts?
No - offcuts feed smaller parts and the bin; they are not a product.
Is nested cutting only about cost?
It is also about grain direction - the nesting respects grain, so yield and quality move together.
How does packing relate to waste?
An oversized carton wastes board and freight at the same time; cartons are sized to the lounge chair, not to a standard box.