Nested cutting lists, offcut policy and kiln losses - how yield engineering keeps dining chairs prices stable.
Yield starts at the board
The price of a dining chair frame hides a cutting list. How parts are nested on the board decides how much of the timber becomes product and how much becomes shavings - and yield is engineered, not hoped for.
Legs are cut from 42 to 50 mm square, seat rails from 20 to 25 mm, back posts 30 to 35 mm where the model carries a shaped back. The thin end — a 20 mm rail — is where drying matters most, because a thin section releases moisture fast and moves first.
Around 70% of what we run is ash and roughly 30% rubberwood, and both appear in this category's charge book. Ash dries steadily and holds its colour; rubberwood dries fast and evenly. Both are metered the same way.
Cutting lists are nested per model
Parts are nested by length and grain direction before the saw runs. The offcut policy is written: what is kept, what is binned, and what goes to smaller parts of other models.
Four legs, two side rails, two end rails and a back: the tenoner sets all of them in one fixture so a repeat order matches the first run. A tenon cut 1 mm small is a joint that stays loose for the life of the chair, and it cannot be seen until the frame is loaded.
| Stage | Control | Result |
|---|---|---|
| Cutting | Nested parts lists | Yield engineered per model |
| Offcuts | Written policy | Kept, reused or binned |
| Cloth | Nested markers | Fabric waste controlled |
| Kiln degrade | Metered | Feeds timber selection |
| Packing | Right-sized cartons | Freight is waste too |
Where waste lives
Cloth gets the same treatment
Upholstery covers are nested markers for the same reason - fabric waste is money too, and the marker is the difference between a competitive quote and a fat one.
Roughly two thirds of this category is a solid wood frame with a wood seat; the rest carries a padded seat or a woven seat. Covers on the padded models are cut to a nested marker so a repeat order matches the original run.
Kiln losses are counted
Drying is not free of losses; degrade is metered and fed back into timber selection so the next batch buys better.
Seat rails at 20 to 25 mm and legs at 42 to 50 mm do not dry at the same rate. Running them through one charge is the standard shortcut that produces a frame whose rails move after assembly, so we group by section rather than by order.
Why waste control is the buyer's business
A factory that controls yield quotes stable prices across orders. One that doesn't quotes whatever the offcut bin looks like that week.
Two per carton, 0.09 to 0.13 m³ a carton, most models knock-down so the seat and back come off the frame. MOQ is 6 pieces per model and mixed colours are allowed.
The catalogue lists 269 models in this category: 82% on a solid or wood frame and 18% with an upholstered or soft cover.
Reference
Questions
Does yield affect my price?
Directly. A nested cutting list is why repeat orders hold their price instead of drifting up.
Can I buy the offcuts?
No - offcuts feed smaller parts and the bin; they are not a product.
Is nested cutting only about cost?
It is also about grain direction - the nesting respects grain, so yield and quality move together.
How does packing relate to waste?
An oversized carton wastes board and freight at the same time; cartons are sized to the dining chair, not to a standard box.