Guangdong Chair Factory Notes Production floor, Longjiang · Foshan

Factory Notes › Wooden Bar Stools

Timber Yield and Waste Control on Bar Stools

Nested cutting lists, offcut policy and kiln losses - how yield engineering keeps bar stools prices stable.

Updated 2026-11-16Longjiang, Foshan11 min read

Nested cutting lists, offcut policy and kiln losses - how yield engineering keeps bar stools prices stable.

These notes come off the production floor in Longjiang, Foshan. The current wooden bar stools supplier range is on the main site, with a specification page for every model in it.

Yield starts at the board

The price of a bar stool frame hides a cutting list. How parts are nested on the board decides how much of the timber becomes product and how much becomes shavings - and yield is engineered, not hoped for.

The column and the footring are the thick sections here: a 45 to 60 mm column blank, a ring formed from 25 to 30 mm stock, seat blanks at 25 to 30 mm. On the swivel models the column is bought in as tube and machined to fit the mount.

Most stools here run a wood seat on a wood or metal column, so the timber in the charge is seat stock — ash on roughly 70% of the programme, rubberwood on the rest. Plated metal components arrive finished and are not part of the moisture conversation at all.

Cutting lists are nested per model

Parts are nested by length and grain direction before the saw runs. The offcut policy is written: what is kept, what is binned, and what goes to smaller parts of other models.

The column is turned or machined from a single blank wherever the model allows, because a jointed column on a high stool is a wobble waiting to happen. On swivel models the mount plate is machined to fit the tube rather than welded to a rough cut.

StageControlResult
CuttingNested parts listsYield engineered per model
OffcutsWritten policyKept, reused or binned
ClothNested markersFabric waste controlled
Kiln degradeMeteredFeeds timber selection
PackingRight-sized cartonsFreight is waste too

Where waste lives

Cloth gets the same treatment

Upholstery covers are nested markers for the same reason - fabric waste is money too, and the marker is the difference between a competitive quote and a fat one.

Seats are the part that fails first on a stool. Leather and velvet covers around 26 of the 88 models take a knee-slide load that a dining chair never sees, so the seam is placed away from the front edge and the foam is wrapped rather than loose.

Kiln losses are counted

Drying is not free of losses; degrade is metered and fed back into timber selection so the next batch buys better.

A stool column is a thick section and a footring is a bent one, and both come out of the same charge as thinner seat blanks. That is exactly the case where one schedule delivers two moisture contents, so the thick stock is dried separately.

Why waste control is the buyer's business

A factory that controls yield quotes stable prices across orders. One that doesn't quotes whatever the offcut bin looks like that week.

Stools pack small — 0.08 to 0.12 m³ for two — so the freight per piece is the best in the catalogue and a 40HC holds a lot of them. MOQ is 6 pieces per model.

The catalogue lists 86 models in this category: 44% on a solid or wood frame and 33% with an upholstered or soft cover.

Questions

Does yield affect my price?

Directly. A nested cutting list is why repeat orders hold their price instead of drifting up.

Can I buy the offcuts?

No - offcuts feed smaller parts and the bin; they are not a product.

Is nested cutting only about cost?

It is also about grain direction - the nesting respects grain, so yield and quality move together.

How does packing relate to waste?

An oversized carton wastes board and freight at the same time; cartons are sized to the bar stool, not to a standard box.