The sample route for a lounge chair - feasibility, first build, one revision round, and the sealed golden sample production is judged against.
What a sample is for
A lounge chair sample is not a scaled-down order; it is the agreement the whole order is checked against. Every dimension, finish and packing detail that appears on the golden sample becomes a checkpoint on the production line, which is why we treat sample work as a separate operation with its own bench and its own clock.
Most lounge chairs are covered, which changes what moisture means here. The frame cannot crack where nobody sees it, but it can move inside the cover, and the symptom is a wrinkle or a split seam rather than a visible crack.
From enquiry to first sample
Buyer sends the model code or a drawing, the workshop pulls the timber and cuts one frame the same way production will - same jigs, same glue, same sanding sequence. A new lounge chair sample takes 7 to 15 days depending on whether the tooling already exists.
Most of the frame here is machined for fit rather than for appearance: rails at 30 to 40 mm, a shaped ply or webbed seat deck, and no exposed joinery worth naming. Tolerance matters where the cover meets the frame, not where the eye looks.
| Stage | What happens | Time / output |
|---|---|---|
| 1. Enquiry | Code, drawing or photo | Feasibility answer in 24 h |
| 2. First sample | Same jigs as production | 7-15 days |
| 3. Revision | One consolidated round | 3-7 days |
| 4. Golden sample | Signed and sealed | Two pieces: buyer + retained |
| 5. Production | Checked against retained | Every carton |
Sample route
The revision round
Revisions are cheapest before the sample leaves the factory. Height, seat depth, arm profile, foam firmness and stain colour can all be changed in one round; changing them after mass production starts means re-cutting the fixtures.
A lounge chair is a soft seat on a frame, not a frame with a pad. 220 of the 226 models in this category are upholstered, so the frame is a substrate: it has to hold the foam and the cover in shape under a sitter who stays put for an hour, not one who leaves in twenty minutes.
Frames are wood or metal under the cover, and the load path goes through the seat deck rather than the rails. Webbing or a sprung deck decides how the seat feels after a year more than the timber species does.
Golden sample and retained sample
Once approved, two samples are sealed: one travels to the buyer, one stays in the inspection area. Every carton of lounge chairs shipped against that order is judged against the retained piece, not against memory.
Comfort testing counts as much as strength here: foam compression set under repeated loading, cover abrasion, and a frame fatigue test at Level 1 or Level 2 depending on the traffic the lobby actually sees.
Samples from the current range
The catalogue lists 225 models in this category: 1% on a solid or wood frame and 99% with an upholstered or soft cover.
Ready-made references you can order straight away: GDC-5652 (Velvet/Fabric/Leather, MOQ 4 pcs), GDC-5652 (Velvet/Fabric/Leather, MOQ 2 pcs), GDC-5652 (Velvet/Fabric/Leather, MOQ 4 pcs).
Reference
Questions
Do you charge for samples?
Sample cost and courier are quoted separately; the amount is credited against the mass production order once it is confirmed.
How many revisions can I make?
One consolidated round is normal. Each extra round adds roughly a week because the fixture changes have to be re-proven.
Is the sample made on the production line?
Yes - same jigs, same glue, same sanding. A sample made on a special bench tells you nothing about the 600 pieces that follow.
What is a golden sample?
The signed reference both sides agree to judge the order by. We keep one, you keep one.