Guangdong Chair Factory Notes Production floor, Longjiang · Foshan

Factory Notes › Wooden Bar Stools

How a Bar Stool Sample Moves from Sketch to Golden Sample

The sample route for a bar stool - feasibility, first build, one revision round, and the sealed golden sample production is judged against.

Updated 2026-11-11Longjiang, Foshan11 min read

The sample route for a bar stool - feasibility, first build, one revision round, and the sealed golden sample production is judged against.

These notes come off the production floor in Longjiang, Foshan. The current wholesale wooden bar stools range is on the main site, with a specification page for every model in it.

What a sample is for

A bar stool sample is not a scaled-down order; it is the agreement the whole order is checked against. Every dimension, finish and packing detail that appears on the golden sample becomes a checkpoint on the production line, which is why we treat sample work as a separate operation with its own bench and its own clock.

A stool is a tall, narrow object with a footring, and the moisture problems in this category show up in the column and the ring rather than in the seat. A column that dried unevenly bows, and a bow is obvious the moment someone sits on it.

From enquiry to first sample

Buyer sends the model code or a drawing, the workshop pulls the timber and cuts one frame the same way production will - same jigs, same glue, same sanding sequence. A new bar stool sample takes 7 to 15 days depending on whether the tooling already exists.

The column is turned or machined from a single blank wherever the model allows, because a jointed column on a high stool is a wobble waiting to happen. On swivel models the mount plate is machined to fit the tube rather than welded to a rough cut.

StageWhat happensTime / output
1. EnquiryCode, drawing or photoFeasibility answer in 24 h
2. First sampleSame jigs as production7-15 days
3. RevisionOne consolidated round3-7 days
4. Golden sampleSigned and sealedTwo pieces: buyer + retained
5. ProductionChecked against retainedEvery carton

Sample route

The revision round

Revisions are cheapest before the sample leaves the factory. Height, seat depth, arm profile, foam firmness and stain colour can all be changed in one round; changing them after mass production starts means re-cutting the fixtures.

A stool carries its load differently from a chair. The seat is high, the base is narrow relative to the height, and the footring takes a sideways kick every time someone climbs on or pushes off. That is why the ring on our stools is a welded closed section joined to the column, not a ring screwed into a leg.

The critical junction is where the column meets the seat mount and where the footring meets the column. On a swivel model the gas lift is a bought-in component and we test the assembly, not just the frame: a lift rated for office duty is not the same part as one rated for a bar that runs twelve hours a day.

Golden sample and retained sample

Once approved, two samples are sealed: one travels to the buyer, one stays in the inspection area. Every carton of bar stools shipped against that order is judged against the retained piece, not against memory.

Beyond the frame test a stool gets a stability check at height and a footring load test: push the ring sideways with the stool loaded and it must not deform. Swivel models are cycled, not just sat on.

Samples from the current range

The catalogue lists 86 models in this category: 44% on a solid or wood frame and 33% with an upholstered or soft cover.

Ready-made references you can order straight away: A10037 (Solid Wood, MOQ 4 pcs), by-62565 (Leather/Velvet/Fabric, MOQ 6 pcs), A001 (100% Solid Wood, MOQ 2 pcs).

Questions

Do you charge for samples?

Sample cost and courier are quoted separately; the amount is credited against the mass production order once it is confirmed.

How many revisions can I make?

One consolidated round is normal. Each extra round adds roughly a week because the fixture changes have to be re-proven.

Is the sample made on the production line?

Yes - same jigs, same glue, same sanding. A sample made on a special bench tells you nothing about the 600 pieces that follow.

What is a golden sample?

The signed reference both sides agree to judge the order by. We keep one, you keep one.