Load ratings, humidity, repairability - the honest trade-offs between metal and wood frames on lounge chairs.
The frame mix in this category
The catalogue lists 225 models in this category: 1% on a solid or wood frame and 99% with an upholstered or soft cover.
Frames buyers see most often: Velvet/Fabric/Leather (219), wood/Fabric (2), Solid wood (1).
What metal frames buy you
Steel gives thin profiles and high load ratings, and it does not move with humidity. The trade is the process: cutting, welding, grinding and plating are a different line with different checkpoints.
A lounge chair is a soft seat on a frame, not a frame with a pad. 220 of the 226 models in this category are upholstered, so the frame is a substrate: it has to hold the foam and the cover in shape under a sitter who stays put for an hour, not one who leaves in twenty minutes.
Most of the frame here is machined for fit rather than for appearance: rails at 30 to 40 mm, a shaped ply or webbed seat deck, and no exposed joinery worth naming. Tolerance matters where the cover meets the frame, not where the eye looks.
| Aspect | Metal | Wood |
|---|---|---|
| Profile | Slim, high load | Warmer, repairable |
| Movement | None with humidity | Managed by design |
| Process | Weld, grind, plate | Cut, joint, finish |
| Failure mode | Weld fatigue | Moisture / joint |
| Best fit | Stacking, nightly turnover | Long-life interiors |
Metal vs wood frames
What wood frames buy you
Repairability, warmth and a joint you can re-glue in year five. Wood moves with the season, so the joinery is designed for movement rather than against it.
Frames are wood or metal under the cover, and the load path goes through the seat deck rather than the rails. Webbing or a sprung deck decides how the seat feels after a year more than the timber species does.
Where each wins in service
Metal suits venues that stack, scrub and re-configure nightly. Wood suits rooms where the lounge chair is furniture first and equipment second.
Hotel lobbies, waiting areas, senior living, reading corners. Seat height 400 to 430 mm with the back raked further than a dining chair, because the sitter is resting rather than eating. A side table at 350 to 400 mm goes with it.
Frames in the current range
Representative lounge chairs models with their frames and MOQs: GDC-5652 (Velvet/Fabric/Leather, MOQ 4 pcs), GDC-5652 (Velvet/Fabric/Leather, MOQ 2 pcs), GDC-5652 (Velvet/Fabric/Leather, MOQ 2 pcs).
Reference
Questions
Can I get the same model in both frames?
Sometimes - several wooden lounge chairs designs exist in both; the specification page names the frame per model.
Which frame is stronger?
Rated loads are met by both; the difference is how they fail and how they are repaired, not a simple winner.
Do metal frames rust?
Plating and coating are specified against the destination climate; coastal projects get a different call-out.
Is one cheaper?
Depends on the model; quotations carry the frame mix, and the mix decides.