Guangdong Chair Factory Notes Production floor, Longjiang · Foshan

Factory Notes › Wooden Bar Stools

Metal and Wood Frames on Bar Stools: Where Each Wins

Load ratings, humidity, repairability - the honest trade-offs between metal and wood frames on bar stools.

Updated 2026-11-09Longjiang, Foshan11 min read

Load ratings, humidity, repairability - the honest trade-offs between metal and wood frames on bar stools.

These notes come off the production floor in Longjiang, Foshan. The current wholesale wooden bar stools range is on the main site, with a specification page for every model in it.

The frame mix in this category

The catalogue lists 86 models in this category: 44% on a solid or wood frame and 33% with an upholstered or soft cover.

Frames buyers see most often: Leather/Velvet/Fabric (25), 100% Solid Wood (18), Solid Wood (15).

What metal frames buy you

Steel gives thin profiles and high load ratings, and it does not move with humidity. The trade is the process: cutting, welding, grinding and plating are a different line with different checkpoints.

A stool carries its load differently from a chair. The seat is high, the base is narrow relative to the height, and the footring takes a sideways kick every time someone climbs on or pushes off. That is why the ring on our stools is a welded closed section joined to the column, not a ring screwed into a leg.

The column is turned or machined from a single blank wherever the model allows, because a jointed column on a high stool is a wobble waiting to happen. On swivel models the mount plate is machined to fit the tube rather than welded to a rough cut.

AspectMetalWood
ProfileSlim, high loadWarmer, repairable
MovementNone with humidityManaged by design
ProcessWeld, grind, plateCut, joint, finish
Failure modeWeld fatigueMoisture / joint
Best fitStacking, nightly turnoverLong-life interiors

Metal vs wood frames

What wood frames buy you

Repairability, warmth and a joint you can re-glue in year five. Wood moves with the season, so the joinery is designed for movement rather than against it.

The critical junction is where the column meets the seat mount and where the footring meets the column. On a swivel model the gas lift is a bought-in component and we test the assembly, not just the frame: a lift rated for office duty is not the same part as one rated for a bar that runs twelve hours a day.

Where each wins in service

Metal suits venues that stack, scrub and re-configure nightly. Wood suits rooms where the bar stool is furniture first and equipment second.

Height decides everything: 650 mm seat for a 900 mm bar top, 750 mm for a 1050 mm counter. Get it wrong by 50 mm and the sitter either perches or cannot reach the top. Kitchen islands in apartments are the fastest growing part of this category.

Frames in the current range

Representative bar stools models with their frames and MOQs: A001 (100% Solid Wood, MOQ 6 pcs), A10039 (Solid Wood, MOQ 4 pcs), by-62565 (Leather/Velvet/Fabric, MOQ 6 pcs).

Questions

Can I get the same model in both frames?

Sometimes - several wooden bar stools designs exist in both; the specification page names the frame per model.

Which frame is stronger?

Rated loads are met by both; the difference is how they fail and how they are repaired, not a simple winner.

Do metal frames rust?

Plating and coating are specified against the destination climate; coastal projects get a different call-out.

Is one cheaper?

Depends on the model; quotations carry the frame mix, and the mix decides.