Guangdong Chair Factory Notes Production floor, Longjiang · Foshan

Factory Notes › Wooden Dining Armchairs

Line Capacity: How Many Dining Armchairs a Day, and What Limits It

Why daily output for dining armchairs depends on the model mix, the season and the bottleneck - and how dates are planned from that.

Updated 2026-11-07Longjiang, Foshan11 min read

Why daily output for dining armchairs depends on the model mix, the season and the bottleneck - and how dates are planned from that.

These notes come off the production floor in Longjiang, Foshan. The current wooden dining armchairs supplier range is on the main site, with a specification page for every model in it.

Capacity is a model-mix question

The honest answer to "how many dining armchair a day" is "of which model". A simple frame runs fast; an upholstered dining armchair with a deep finish takes the same bench hours as two simple ones. Quotations are planned against the mix, not against an average.

Packing runs 0.14 to 0.20 m³ for two with protective arm covers, because an arm is the easiest thing to damage in transit and the most expensive to replace. MOQ is 6 pieces per model.

What the mix looks like right now

The catalogue lists 253 models in this category: 87% on a solid or wood frame and 13% with an upholstered or soft cover.

The most common order quantity in this category is 6 pcs (207 models ship at that level).

FactorEffectPlanning note
Model complexityFrame vs upholsteredSets bench hours
Finish systemCoat countBooth time per piece
SeasonCNY and peaksLead time +/- weeks
MixSimple vs detailed dining armchairsBottleneck location
SurgeOvertime, quotedNever free

Capacity factors

The bottleneck moves with the order

Finishing and upholstery are the usual limits; a plain-frame dining armchair run is limited by machining instead. Knowing where the bottleneck sits is how a promised date is built.

The arm is the expensive machining job in this category. It is a shaped, tapered component that has to meet the back post at a fixed angle, and that tenon is cut on the tenoner rather than by hand — a hand-cut arm joint is the failure we get called about.

Seasonality is real

Pre-Chinese-New-Year months run at full stretch and lead times stretch with them; post-holiday months have slack. Buyers who plan around the calendar get better dates than buyers who plan around hope.

Packing runs 0.14 to 0.20 m³ for two with protective arm covers, because an arm is the easiest thing to damage in transit and the most expensive to replace. MOQ is 6 pieces per model.

What surge capacity actually costs

Yes, the line can sprint - with overtime and with finish quality held by inspection rather than by schedule. It is available, it is quoted, and it is never free.

An armchair is tested for a downward and a sideways load on the arm itself, not only for seat and back fatigue. That arm load test is what separates a hospitality-grade armchair from a domestic one.

Questions

What is your daily output for dining armchairs?

It depends on the model mix; quotations carry a production plan with the bottleneck named, not a round number.

Can you hold a peak-season date?

Dates are promised against the calendar, not against hope - peak-season orders are booked with the stretch priced in.

Why did my simple model run late?

If the mix that week was upholstery-heavy, the simple frames queue behind the booth. The plan, not the promise, is what to read.

How early should I book a big wooden dining armchairs order?

Ahead of the pre-holiday stretch if possible; the production calendar is the honest constraint.