Guangdong Chair Factory Notes Production floor, Longjiang · Foshan

Factory Notes › Solid Wood Dining Chairs

Dining Chairs for Hotel Projects: Specs, Volume and Schedule

Document sets, housekeeping-grade durability and backwards scheduling - what a hotel order for dining chairs actually contains.

Updated 2026-11-03Longjiang, Foshan11 min read

Document sets, housekeeping-grade durability and backwards scheduling - what a hotel order for dining chairs actually contains.

These notes come off the production floor in Longjiang, Foshan. The current wholesale solid wood dining chairs range is on the main site, with a specification page for every model in it.

Hotel projects buy specifications, not chairs

A hotel order for dining chairs is a document set: load ratings, fire and emission paperwork, finish systems, spares policy. The catalogue photo is the smallest part of it.

Two per carton, 0.09 to 0.13 m³ a carton, most models knock-down so the seat and back come off the frame. MOQ is 6 pieces per model and mixed colours are allowed.

Durability graded for housekeeping

Hotel seating is cleaned hard and often. Covers, finishes and foam densities are specified against that routine, and the retained sample is kept against the property's standard.

Domestic seating is tested under EN 12520 — seat and back fatigue, a leg forward load and a stability check. Light contract use moves to EN 16139 Level 1, which cycles the frame considerably harder.

Dining chair stock is the fastest moving inventory in the yard, which is good for turnover and bad for storage discipline: blanks left out through a Foshan wet season take water back within days. Covered store, metered at both ends.

ItemWhat it isWhere it lands
DocumentsLoad, fire, emissionDecided before sample
DurabilityHousekeeping-grade specsRetained sample per property
ConsistencyOne fixture set per orderWaves match
ScheduleBackwards from installDelivery plan in the quote
SparesHardware + touch-upPer floor

Hotel order checklist

Volume and consistency

Floor-by-floor consistency is a fixture question - the same jig set runs the whole order, and a second production wave a year later matches because the tooling is kept.

Four legs, two side rails, two end rails and a back: the tenoner sets all of them in one fixture so a repeat order matches the first run. A tenon cut 1 mm small is a joint that stays loose for the life of the chair, and it cannot be seen until the frame is loaded.

Schedule around the opening

Hotel openings do not move. Production is planned backwards from the install date, including packing, container space and customs lead - the delivery plan is part of the quote.

Two per carton, 0.09 to 0.13 m³ a carton, most models knock-down so the seat and back come off the frame. MOQ is 6 pieces per model and mixed colours are allowed.

What ships with a hotel order

Spare hardware, touch-up kits and aftercare sheets per floor, so the property team runs maintenance without calling the factory.

Dining chair stock is the fastest moving inventory in the yard, which is good for turnover and bad for storage discipline: blanks left out through a Foshan wet season take water back within days. Covered store, metered at both ends.

References hotel buyers shortlist: A008 (100% Solid Wood, MOQ 6 pcs), XY-24018 (Solid wood, MOQ 6 pcs), A003 (100% Solid Wood, MOQ 6 pcs).

Questions

Do you work with hotel FF&E schedules?

Yes - send the schedule; solid wood dining chairs specifications are returned line by line.

Can production waves be split across a year?

Yes, with fixture sets retained so later waves match the first.

What paperwork ships with the order?

Load ratings and the emission/finish documentation the destination requires.

How are hotel quantities priced?

Volume breaks follow the MOQ table; solid wood dining chairs orders of this size are quoted on the production plan, not a single number.