Guangdong Chair Factory Notes Production floor, Longjiang · Foshan

Factory Notes › Restaurant Chairs

NC, PU and Water-Based Finishes on Restaurant Chairs

The three finish systems, what each costs in booth time and paperwork, and how the choice is made for restaurant chairs.

Updated 2026-10-30Longjiang, Foshan11 min read

The three finish systems, what each costs in booth time and paperwork, and how the choice is made for restaurant chairs.

These notes come off the production floor in Longjiang, Foshan. The current wholesale restaurant chairs range is on the main site, with a specification page for every model in it.

Three finish systems, three trade-offs

NC is fast to spray and easy to repair; PU builds film and shrugs at cleaning chemicals; water-based systems answer the emission paperwork that projects ask for. The restaurant chairs specification names the system per model.

Finishes are specified for cleaning, not for depth of sheen. A restaurant seat is wiped with an alkaline agent several times a day, so the coating is chosen for chemical resistance, and the seat edges where the cloth catches are the first thing inspected.

The booth is part of the finish

Filtered airflow, controlled humidity and clean guns - a finish system is only as good as the room it is applied in, and the room is checked the way the coats are.

Contract sections run heavier than domestic: 45 to 55 mm legs, 25 to 30 mm rails, and a stretcher on the models that get dragged rather than lifted. The extra section is not for show — it is what survives a room being re-set several times a day.

SystemStrengthTypical use
NCFast, repairableHome ranges, quick turns
PUHard filmContract service
Water-basedLow emissionProject paperwork
Stain + sealerColour layerPanel-signed per order
Top coatScuff between coatsBooth-controlled

Finish systems

Grain raising and species

Water-based finishes raise grain on open-pore timber and need an extra sanding pass; NC and PU behave differently. Species and system are chosen together.

Ash carries most of this programme and rubberwood covers the rest, both bought to a specification that assumes contract service: ash where the frame takes a daily racking load, rubberwood where the price point has to work.

Durability is tested, not claimed

Finished restaurant chairs go through cleaning-agent resistance and wear checks against the retained panel, because the venue will test them anyway.

EN 16139 Level 2 is the contract grade: higher cycle counts on seat and back, a leg forward load, and a stability test that assumes the user does not sit down gently. Reports are raised per model, not per range.

Documentation for export

VOC and safety paperwork travels with the order where the destination requires it - another reason the finish system is decided before the sample, not after.

Two per carton, 0.10 to 0.15 m³, stackable or knock-down. MOQ is 6 pieces per model, and most buyers run two to four models in one container.

Questions

Which finish should I specify?

Contract restaurant chairs lean PU for chemical resistance; quick-turn home ranges run NC; projects with paperwork lean water-based.

Do water-based finishes look worse?

On open grain they need an extra sanding pass; done right, the difference is the paperwork, not the look.

Can finishes be repaired on site?

NC repairs easily with touch-up; PU repairs are more visible - worth knowing before you choose.

What documentation comes with the finish?

VOC and safety papers where the destination asks; it is a line item on the order, not an afterthought.