Guangdong Chair Factory Notes Production floor, Longjiang · Foshan

Factory Notes › Restaurant Chairs

Export Packing and Container Loading for Restaurant Chairs

Carton build-up, drop testing, 40HC loading figures, ISPM 15 and the photographic record that turns a damage dispute into a claim — for restaurant chairs shipments out of Foshan.

Updated 2026-11-14Longjiang, Foshan16 min read

Carton build-up, drop testing, 40HC loading figures, ISPM 15 and the photographic record that turns a damage dispute into a claim — for restaurant chairs shipments out of Foshan.

These notes come off the production floor in Longjiang, Foshan. The current restaurant chairs range is on the main site, with a specification page for every model in it.

Carton specification

Restaurant Chairs ship stackable or knock-down, four to six high per stack in a five-ply export carton with EPE between components and corner board on the frame ends. Volume is 0.10-0.15 m³ per carton (2 pcs).

The first carton of every new model is drop-tested. Corner damage is the overwhelming majority of seating damage claims and it is almost always a carton specified one ply too light.

Container loading

A 40HC holds roughly 68 m³ of usable volume. At 0.10-0.15 m³ per carton (2 pcs) per carton that is a full container in the order of 500 to 650 pieces, depending on how the components nest. Weight is rarely the constraint — seating is light for its size.

We issue a loading plan: which cartons go on the floor, which stack, where the weight sits, and the running total. It goes out with the quotation so you can book the container knowing the number.

LayerMaterialPurpose
Layer 1EPE sheet between each componentPrevents rub damage in transit
Layer 2Corner board on frame endsAbsorbs the impact drops actually cause
Layer 3Five-ply export cartonRated for stacking in a full container
Layer 4Strapping and stretch wrapHolds the pallet together
Layer 5ISPM 15 pallet if usedRequired for solid wood packaging

Packing build-up

Mixing models

Most first orders contain two to four models. Give us the ratio and the plan is built to it. Below roughly 15 m³, LCL looks cheaper and is not — more handling, more damage, and a per-cubic rate that erases the saving. Pick the models and we will run the numbers.

Wood packaging rules

Solid wood pallets and crates need the ISPM 15 mark — heat-treated or fumigated and stamped. Corrugated cartons and manufactured board are exempt. Missing stamp means a held container at destination.

Documentation

Commercial invoice, packing list with carton count and the moisture reading, certificate of origin, and the test report for the model. FOB Shenzhen is standard; EXW and CIF on request.

The drop test, properly

One corner, three edges, six faces — the standard sequence, from a height agreed with the buyer, with the carton weighed before and after. The test is run on the first carton of every new model and again if the carton specification changes.

What it catches is almost always corner crush, and what causes corner crush is a board grade below the stacking load in a full container. The fix costs less than a dollar a carton.

Stuffing sequence

Heavy, rigid cartons on the floor, lighter ones stacked above, weight distributed across the floor rather than concentrated, and nothing loaded against a container wall without dunnage. The stack is built to a plan rather than by eye, which is why a 40HC loads to the number we quoted rather than to whatever fits.

Strapping and, where the route is rough, a load bar. Seating is light enough that the container fills before it gets heavy, so the risk is not overloading — it is cartons shifting in a partially filled box.

Holding stock before shipment

Finished goods wait in a covered store, off the floor, with cartons not stacked so high that the bottom one deforms. If a container is delayed a week, that is where the difference between a clean shipment and a crushed one is decided.

We hold rather than rush-load. A container that leaves on schedule with compressed cartons is a claim waiting to be filed.

What a container does to its contents

A sealed box crossing a temperature gradient rains on the inside: moisture condenses on the roof and drips onto the top cartons. Desiccant bags, a moisture barrier liner where the route warrants it, and cartons that are dry when they are loaded are the three defences.

The third is the one factories control and the one most often skipped. Loading cartons that have sat in a damp store is how a clean shipment arrives mouldy.

Photographic record

We photograph the loading sequence and send the set with the shipping documents: carton condition before loading, the stack partway, the container number and the seal. It is the difference between a claim and an argument.

Questions

How many pieces in a 40HC?

Typically 500 to 650 depending on carton dimensions and how the components nest. The loading plan confirms it before you book.

Can I mix models in one container?

Yes - most orders contain two to four models. Send the ratio and we build the plan around it.

Do you ship LCL?

Yes, though above roughly 15 m³ a full container is cheaper per piece and arrives in better condition.