Carton build-up, drop testing, 40HC loading figures, ISPM 15 and the photographic record that turns a damage dispute into a claim — for bar stools shipments out of Foshan.
Carton specification
Wooden Bar Stools ship knock-down, seat and footring separated in a five-ply export carton with EPE between components and corner board on the frame ends. Volume is 0.08-0.12 m³ per carton (2 pcs).
The first carton of every new model is drop-tested. Corner damage is the overwhelming majority of seating damage claims and it is almost always a carton specified one ply too light.
Container loading
A 40HC holds roughly 68 m³ of usable volume. At 0.08-0.12 m³ per carton (2 pcs) per carton that is a full container in the order of 500 to 650 pieces, depending on how the components nest. Weight is rarely the constraint — seating is light for its size.
We issue a loading plan: which cartons go on the floor, which stack, where the weight sits, and the running total. It goes out with the quotation so you can book the container knowing the number.
| Layer | Material | Purpose |
|---|---|---|
| Layer 1 | EPE sheet between each component | Prevents rub damage in transit |
| Layer 2 | Corner board on frame ends | Absorbs the impact drops actually cause |
| Layer 3 | Five-ply export carton | Rated for stacking in a full container |
| Layer 4 | Strapping and stretch wrap | Holds the pallet together |
| Layer 5 | ISPM 15 pallet if used | Required for solid wood packaging |
Packing build-up
Mixing models
Most first orders contain two to four models. Give us the ratio and the plan is built to it. Below roughly 15 m³, LCL looks cheaper and is not — more handling, more damage, and a per-cubic rate that erases the saving. Pick the models and we will run the numbers.
Wood packaging rules
Solid wood pallets and crates need the ISPM 15 mark — heat-treated or fumigated and stamped. Corrugated cartons and manufactured board are exempt. Missing stamp means a held container at destination.
Documentation
Commercial invoice, packing list with carton count and the moisture reading, certificate of origin, and the test report for the model. FOB Shenzhen is standard; EXW and CIF on request.
The drop test, properly
One corner, three edges, six faces — the standard sequence, from a height agreed with the buyer, with the carton weighed before and after. The test is run on the first carton of every new model and again if the carton specification changes.
What it catches is almost always corner crush, and what causes corner crush is a board grade below the stacking load in a full container. The fix costs less than a dollar a carton.
Stuffing sequence
Heavy, rigid cartons on the floor, lighter ones stacked above, weight distributed across the floor rather than concentrated, and nothing loaded against a container wall without dunnage. The stack is built to a plan rather than by eye, which is why a 40HC loads to the number we quoted rather than to whatever fits.
Strapping and, where the route is rough, a load bar. Seating is light enough that the container fills before it gets heavy, so the risk is not overloading — it is cartons shifting in a partially filled box.
Holding stock before shipment
Finished goods wait in a covered store, off the floor, with cartons not stacked so high that the bottom one deforms. If a container is delayed a week, that is where the difference between a clean shipment and a crushed one is decided.
We hold rather than rush-load. A container that leaves on schedule with compressed cartons is a claim waiting to be filed.
What a container does to its contents
A sealed box crossing a temperature gradient rains on the inside: moisture condenses on the roof and drips onto the top cartons. Desiccant bags, a moisture barrier liner where the route warrants it, and cartons that are dry when they are loaded are the three defences.
The third is the one factories control and the one most often skipped. Loading cartons that have sat in a damp store is how a clean shipment arrives mouldy.
Photographic record
We photograph the loading sequence and send the set with the shipping documents: carton condition before loading, the stack partway, the container number and the seal. It is the difference between a claim and an argument.
Reference
Questions
How many pieces in a 40HC?
Typically 500 to 650 depending on carton dimensions and how the components nest. The loading plan confirms it before you book.
Can I mix models in one container?
Yes - most orders contain two to four models. Send the ratio and we build the plan around it.
Do you ship LCL?
Yes, though above roughly 15 m³ a full container is cheaper per piece and arrives in better condition.