Guangdong Chair Factory Notes Production floor, Longjiang · Foshan

Factory Notes › Solid Wood Dining Chairs

Fabric, Leather or Velvet on Dining Chairs: Cover Selection

Martindale counts, cleaning contracts and light - how to pick the cover that survives your venue on dining chairs.

Updated 2026-10-26Longjiang, Foshan11 min read

Martindale counts, cleaning contracts and light - how to pick the cover that survives your venue on dining chairs.

These notes come off the production floor in Longjiang, Foshan. The current solid wood dining chairs range is on the main site, with a specification page for every model in it.

Three covers, three service contracts

Fabric breathes and softens a room; real leather wears in and ages; velvet reads luxury and demands gentle care. On a dining chair the cover is not decoration - it is the surface the venue has to live with.

Roughly two thirds of this category is a solid wood frame with a wood seat; the rest carries a padded seat or a woven seat. Covers on the padded models are cut to a nested marker so a repeat order matches the original run.

Abrasion is the honest number

Contract buyers ask for Martindale counts and we quote them per cover. A home dining chair and a café dining chair do not need the same number, and the price difference is real.

Home dining rooms, apartments and showrooms. Seat height 450 to 470 mm against a 720 to 750 mm table, seat depth 400 to 450 mm. Standard is domestic use under EN 12520, with EN 16139 Level 1 available where the chairs go into a serviced space.

CoverCharacterBest fit
FabricBreathes, widest paletteMid abrasion grades
LeatherAges, wipes cleanHigh service venues
VelvetDeep colour, luxury readGentle care venues
COMBuyer-supplied clothTested before cutting
AftercareSheet ships with orderApproved agents listed

Cover selection

Cleaning decides lifespan

The aftercare sheet that ships with the order lists approved agents per cover type. Most premature cover failures are cleaning failures, not material failures.

Dining chair stock is the fastest moving inventory in the yard, which is good for turnover and bad for storage discipline: blanks left out through a Foshan wet season take water back within days. Covered store, metered at both ends.

Colour and light on covers

Velvet shows direction and light differently at every angle; fabric fades under hard sunlight; leather patinas. Venues with glass walls should pick accordingly.

Home dining rooms, apartments and showrooms. Seat height 450 to 470 mm against a 720 to 750 mm table, seat depth 400 to 450 mm. Standard is domestic use under EN 12520, with EN 16139 Level 1 available where the chairs go into a serviced space.

Covered models in this range

The catalogue lists 269 models in this category: 82% on a solid or wood frame and 18% with an upholstered or soft cover.

Upholstered references with their covers and MOQs: A00827 (100% Solid Wood, MOQ 6 pcs), XY-24018 (Solid wood, MOQ 6 pcs), A0046 (Solid wood/leather, MOQ 6 pcs).

Questions

What Martindale rating do I need?

Home ranges sit lower; café and restaurant solid wood dining chairs usually take a contract-grade count - the specification names it per model.

Can I supply my own fabric?

Yes, COM orders are accepted after a stitchability and shrinkage check.

Which cover is easiest to maintain?

Leather wipes down; fabric with a good aftercare sheet is fine; velvet needs the gentle list.

Does the cover change the price much?

It changes it more than the frame does on upholstered dining chairs - cover grade is a main price driver.