Guangdong Chair Factory Notes Production floor, Longjiang · Foshan

Factory Notes › Wooden Dining Armchairs

Fabric, Leather or Velvet on Dining Armchairs: Cover Selection

Martindale counts, cleaning contracts and light - how to pick the cover that survives your venue on dining armchairs.

Updated 2026-10-26Longjiang, Foshan11 min read

Martindale counts, cleaning contracts and light - how to pick the cover that survives your venue on dining armchairs.

These notes come off the production floor in Longjiang, Foshan. The current wholesale wooden dining armchairs range is on the main site, with a specification page for every model in it.

Three covers, three service contracts

Fabric breathes and softens a room; real leather wears in and ages; velvet reads luxury and demands gentle care. On a dining armchair the cover is not decoration - it is the surface the venue has to live with.

Arms are the hardest part to cover cleanly. On upholstered models the cover is cut with the pattern running along the arm rather than around it, because an arm seen from above shows every mistake in the lay of the fabric.

Abrasion is the honest number

Contract buyers ask for Martindale counts and we quote them per cover. A home dining armchair and a café dining armchair do not need the same number, and the price difference is real.

Head of table, banquets, clubs and hotel suites. Arm height matters as much as seat height: if the arm will not pass under the table apron, the chair cannot be pushed in and it blocks the room. Measure the apron before you order.

CoverCharacterBest fit
FabricBreathes, widest paletteMid abrasion grades
LeatherAges, wipes cleanHigh service venues
VelvetDeep colour, luxury readGentle care venues
COMBuyer-supplied clothTested before cutting
AftercareSheet ships with orderApproved agents listed

Cover selection

Cleaning decides lifespan

The aftercare sheet that ships with the order lists approved agents per cover type. Most premature cover failures are cleaning failures, not material failures.

Thick arm stock holds its moisture longer than the rails do, so the two are never stored together expecting the same behaviour. Arms are machined from stock held in the conditioned store at least a week after the kiln.

Colour and light on covers

Velvet shows direction and light differently at every angle; fabric fades under hard sunlight; leather patinas. Venues with glass walls should pick accordingly.

Head of table, banquets, clubs and hotel suites. Arm height matters as much as seat height: if the arm will not pass under the table apron, the chair cannot be pushed in and it blocks the room. Measure the apron before you order.

Covered models in this range

The catalogue lists 253 models in this category: 87% on a solid or wood frame and 13% with an upholstered or soft cover.

Upholstered references with their covers and MOQs: A003 (100% Solid Wood, MOQ 6 pcs), A008 (100% Solid Wood, MOQ 2 pcs), XY-24018 (Solid wood, MOQ 6 pcs).

Questions

What Martindale rating do I need?

Home ranges sit lower; café and restaurant wooden dining armchairs usually take a contract-grade count - the specification names it per model.

Can I supply my own fabric?

Yes, COM orders are accepted after a stitchability and shrinkage check.

Which cover is easiest to maintain?

Leather wipes down; fabric with a good aftercare sheet is fine; velvet needs the gentle list.

Does the cover change the price much?

It changes it more than the frame does on upholstered dining armchairs - cover grade is a main price driver.