Martindale counts, cleaning contracts and light - how to pick the cover that survives your venue on bar stools.
Three covers, three service contracts
Fabric breathes and softens a room; real leather wears in and ages; velvet reads luxury and demands gentle care. On a bar stool the cover is not decoration - it is the surface the venue has to live with.
Seats are the part that fails first on a stool. Leather and velvet covers around 26 of the 88 models take a knee-slide load that a dining chair never sees, so the seam is placed away from the front edge and the foam is wrapped rather than loose.
Abrasion is the honest number
Contract buyers ask for Martindale counts and we quote them per cover. A home bar stool and a café bar stool do not need the same number, and the price difference is real.
Height decides everything: 650 mm seat for a 900 mm bar top, 750 mm for a 1050 mm counter. Get it wrong by 50 mm and the sitter either perches or cannot reach the top. Kitchen islands in apartments are the fastest growing part of this category.
| Cover | Character | Best fit |
|---|---|---|
| Fabric | Breathes, widest palette | Mid abrasion grades |
| Leather | Ages, wipes clean | High service venues |
| Velvet | Deep colour, luxury read | Gentle care venues |
| COM | Buyer-supplied cloth | Tested before cutting |
| Aftercare | Sheet ships with order | Approved agents listed |
Cover selection
Cleaning decides lifespan
The aftercare sheet that ships with the order lists approved agents per cover type. Most premature cover failures are cleaning failures, not material failures.
Seat blanks for stools are small and they take water back quickly if they stand in an open yard. They move from the kiln to a covered store and are machined within the week, because a 25 mm blank has very little reserve.
Colour and light on covers
Velvet shows direction and light differently at every angle; fabric fades under hard sunlight; leather patinas. Venues with glass walls should pick accordingly.
Height decides everything: 650 mm seat for a 900 mm bar top, 750 mm for a 1050 mm counter. Get it wrong by 50 mm and the sitter either perches or cannot reach the top. Kitchen islands in apartments are the fastest growing part of this category.
Covered models in this range
The catalogue lists 86 models in this category: 44% on a solid or wood frame and 33% with an upholstered or soft cover.
Upholstered references with their covers and MOQs: C923 (100% Metal, MOQ 2 pcs), by-62565 (Iron/Velvet, MOQ 10 pcs), A00112 (Solid Wood, MOQ 4 pcs).
Reference
Questions
What Martindale rating do I need?
Home ranges sit lower; café and restaurant wooden bar stools usually take a contract-grade count - the specification names it per model.
Can I supply my own fabric?
Yes, COM orders are accepted after a stitchability and shrinkage check.
Which cover is easiest to maintain?
Leather wipes down; fabric with a good aftercare sheet is fine; velvet needs the gentle list.
Does the cover change the price much?
It changes it more than the frame does on upholstered bar stools - cover grade is a main price driver.