Guangdong Chair Factory Notes Production floor, Longjiang · Foshan

Factory Notes › Restaurant Chairs

Colour Matching Restaurant Chairs: Stains, Panels and Light

Sealed panels, one stain batch per order and the two-light check that keeps colour honest on restaurant chairs.

Updated 2026-10-23Longjiang, Foshan11 min read

Sealed panels, one stain batch per order and the two-light check that keeps colour honest on restaurant chairs.

These notes come off the production floor in Longjiang, Foshan. The current restaurant chairs range is on the main site, with a specification page for every model in it.

Colour is agreed on wood, not on screens

Every restaurant chair order gets a physical stained panel, sealed and signed by both sides. Screen colours shift with the monitor and the room; a sealed panel does not.

Finishes are specified for cleaning, not for depth of sheen. A restaurant seat is wiped with an alkaline agent several times a day, so the coating is chosen for chemical resistance, and the seat edges where the cloth catches are the first thing inspected.

One stain batch per order

Stain is mixed per order and logged. The booth matches against the panel under controlled light, so restaurant chair number 400 is compared with the same reference that restaurant chair number 1 was.

EN 16139 Level 2 is the contract grade: higher cycle counts on seat and back, a leg forward load, and a stability test that assumes the user does not sit down gently. Reports are raised per model, not per range.

ControlMethodWhy
Sealed panelSigned per orderThe contract of record
Stain batchMixed and logged per orderOne batch, no drift
Light checkTwo sourcesMetamerism caught early
Species pairingColour and timber specified togetherPredictable uptake
Aftercare sheetApproved cleaning agentsColour survives service

Colour control

Species changes the same stain

The same stain formula lands differently on open grain than on tight grain, so species and colour are specified together, never separately.

Ash carries most of this programme and rubberwood covers the rest, both bought to a specification that assumes contract service: ash where the frame takes a daily racking load, rubberwood where the price point has to work.

Metamerism: the showroom problem

A pair that matches under shop light can split under warm restaurant light. Panels are checked under two light sources for exactly this reason - restaurant chairs in a project live under mixed lighting, not under a light box.

Restaurants, cafés, bistros and hotel dining rooms — the largest category we build, 490 models. Stacking four to six high is common because rooms get re-set, and a stackable frame is a different engineering job from a knock-down one.

Keeping colour honest in service

Cleaning chemicals and sunlight move colour over the years; the aftercare sheet says which agents are safe so the panel match survives the venue.

This stock moves in volume and it is metered at packing as well as at the kiln, because a container of restaurant seating sits in a humid port before it is unloaded, and the reading at destination is the one that matters.

Questions

Can you match Pantone or RAL?

On stained timber we match to a physical panel, not a number; send the target and we sign off a stained restaurant chair panel first.

Why does my sample look different at night?

Lighting. We check panels under two sources so the match survives the venue, not just the showroom.

Do touch-up supplies ship with the order?

Yes - stain and finish touch-up for the order ships with the first carton.

How consistent is colour across 300 pieces?

One stain batch per order plus panel checks in the booth; variation stays inside what a sealed panel defines.