Guangdong Chair Factory Notes Production floor, Longjiang · Foshan

Factory Notes › Wooden Lounge Chairs

Colour Matching Lounge Chairs: Stains, Panels and Light

Sealed panels, one stain batch per order and the two-light check that keeps colour honest on lounge chairs.

Updated 2026-10-23Longjiang, Foshan11 min read

Sealed panels, one stain batch per order and the two-light check that keeps colour honest on lounge chairs.

These notes come off the production floor in Longjiang, Foshan. The current wooden lounge chairs supplier range is on the main site, with a specification page for every model in it.

Colour is agreed on wood, not on screens

Every lounge chair order gets a physical stained panel, sealed and signed by both sides. Screen colours shift with the monitor and the room; a sealed panel does not.

Almost none of the frame shows. What matters is that nothing rough touches the cover from inside: a splinter on a rail wears through fabric from the back within months, which is why upholstered frames are sanded and sealed even where no one will look.

One stain batch per order

Stain is mixed per order and logged. The booth matches against the panel under controlled light, so lounge chair number 400 is compared with the same reference that lounge chair number 1 was.

Comfort testing counts as much as strength here: foam compression set under repeated loading, cover abrasion, and a frame fatigue test at Level 1 or Level 2 depending on the traffic the lobby actually sees.

ControlMethodWhy
Sealed panelSigned per orderThe contract of record
Stain batchMixed and logged per orderOne batch, no drift
Light checkTwo sourcesMetamerism caught early
Species pairingColour and timber specified togetherPredictable uptake
Aftercare sheetApproved cleaning agentsColour survives service

Colour control

Species changes the same stain

The same stain formula lands differently on open grain than on tight grain, so species and colour are specified together, never separately.

The timber here is mostly hidden, so the programme runs ash and rubberwood on cost and stability rather than on figure. In this category the species conversation is about the cover, not the frame.

Metamerism: the showroom problem

A pair that matches under shop light can split under warm restaurant light. Panels are checked under two light sources for exactly this reason - lounge chairs in a project live under mixed lighting, not under a light box.

Hotel lobbies, waiting areas, senior living, reading corners. Seat height 400 to 430 mm with the back raked further than a dining chair, because the sitter is resting rather than eating. A side table at 350 to 400 mm goes with it.

Keeping colour honest in service

Cleaning chemicals and sunlight move colour over the years; the aftercare sheet says which agents are safe so the panel match survives the venue.

Frames for upholstery go straight from the conditioned store to machining, because a frame that has picked up moisture will move after the cover is fitted — and a cover hides that movement until the seam splits.

Questions

Can you match Pantone or RAL?

On stained timber we match to a physical panel, not a number; send the target and we sign off a stained lounge chair panel first.

Why does my sample look different at night?

Lighting. We check panels under two sources so the match survives the venue, not just the showroom.

Do touch-up supplies ship with the order?

Yes - stain and finish touch-up for the order ships with the first carton.

How consistent is colour across 300 pieces?

One stain batch per order plus panel checks in the booth; variation stays inside what a sealed panel defines.