Guangdong Chair Factory Notes Production floor, Longjiang · Foshan

Factory Notes › Solid Wood Dining Chairs

Colour Matching Dining Chairs: Stains, Panels and Light

Sealed panels, one stain batch per order and the two-light check that keeps colour honest on dining chairs.

Updated 2026-10-22Longjiang, Foshan11 min read

Sealed panels, one stain batch per order and the two-light check that keeps colour honest on dining chairs.

These notes come off the production floor in Longjiang, Foshan. The current wholesale solid wood dining chairs range is on the main site, with a specification page for every model in it.

Colour is agreed on wood, not on screens

Every dining chair order gets a physical stained panel, sealed and signed by both sides. Screen colours shift with the monitor and the room; a sealed panel does not.

The seat is the surface people touch and see. A solid wood seat is sanded to a finer grit than the frame and the end grain is sealed, because a seat splits from the end outwards. Frames get the standard three-grit sequence.

One stain batch per order

Stain is mixed per order and logged. The booth matches against the panel under controlled light, so dining chair number 400 is compared with the same reference that dining chair number 1 was.

Domestic seating is tested under EN 12520 — seat and back fatigue, a leg forward load and a stability check. Light contract use moves to EN 16139 Level 1, which cycles the frame considerably harder.

ControlMethodWhy
Sealed panelSigned per orderThe contract of record
Stain batchMixed and logged per orderOne batch, no drift
Light checkTwo sourcesMetamerism caught early
Species pairingColour and timber specified togetherPredictable uptake
Aftercare sheetApproved cleaning agentsColour survives service

Colour control

Species changes the same stain

The same stain formula lands differently on open grain than on tight grain, so species and colour are specified together, never separately.

Around 70% of what we run is ash and roughly 30% rubberwood, and both appear in this category's charge book. Ash dries steadily and holds its colour; rubberwood dries fast and evenly. Both are metered the same way.

Metamerism: the showroom problem

A pair that matches under shop light can split under warm restaurant light. Panels are checked under two light sources for exactly this reason - dining chairs in a project live under mixed lighting, not under a light box.

Home dining rooms, apartments and showrooms. Seat height 450 to 470 mm against a 720 to 750 mm table, seat depth 400 to 450 mm. Standard is domestic use under EN 12520, with EN 16139 Level 1 available where the chairs go into a serviced space.

Keeping colour honest in service

Cleaning chemicals and sunlight move colour over the years; the aftercare sheet says which agents are safe so the panel match survives the venue.

Dining chair stock is the fastest moving inventory in the yard, which is good for turnover and bad for storage discipline: blanks left out through a Foshan wet season take water back within days. Covered store, metered at both ends.

Questions

Can you match Pantone or RAL?

On stained timber we match to a physical panel, not a number; send the target and we sign off a stained dining chair panel first.

Why does my sample look different at night?

Lighting. We check panels under two sources so the match survives the venue, not just the showroom.

Do touch-up supplies ship with the order?

Yes - stain and finish touch-up for the order ships with the first carton.

How consistent is colour across 300 pieces?

One stain batch per order plus panel checks in the booth; variation stays inside what a sealed panel defines.