Guangdong Chair Factory Notes Production floor, Longjiang · Foshan

Factory Notes › Wooden Bar Stools

Colour Matching Bar Stools: Stains, Panels and Light

Sealed panels, one stain batch per order and the two-light check that keeps colour honest on bar stools.

Updated 2026-10-22Longjiang, Foshan11 min read

Sealed panels, one stain batch per order and the two-light check that keeps colour honest on bar stools.

These notes come off the production floor in Longjiang, Foshan. The current wooden bar stools range is on the main site, with a specification page for every model in it.

Colour is agreed on wood, not on screens

Every bar stool order gets a physical stained panel, sealed and signed by both sides. Screen colours shift with the monitor and the room; a sealed panel does not.

A stool is seen from below as often as from above — the underside of the seat and the footring sit at eye level for anyone at the bar. Both get the same three-grit sequence as the visible faces, and the ring is finished before it is welded.

One stain batch per order

Stain is mixed per order and logged. The booth matches against the panel under controlled light, so bar stool number 400 is compared with the same reference that bar stool number 1 was.

Beyond the frame test a stool gets a stability check at height and a footring load test: push the ring sideways with the stool loaded and it must not deform. Swivel models are cycled, not just sat on.

ControlMethodWhy
Sealed panelSigned per orderThe contract of record
Stain batchMixed and logged per orderOne batch, no drift
Light checkTwo sourcesMetamerism caught early
Species pairingColour and timber specified togetherPredictable uptake
Aftercare sheetApproved cleaning agentsColour survives service

Colour control

Species changes the same stain

The same stain formula lands differently on open grain than on tight grain, so species and colour are specified together, never separately.

Most stools here run a wood seat on a wood or metal column, so the timber in the charge is seat stock — ash on roughly 70% of the programme, rubberwood on the rest. Plated metal components arrive finished and are not part of the moisture conversation at all.

Metamerism: the showroom problem

A pair that matches under shop light can split under warm restaurant light. Panels are checked under two light sources for exactly this reason - bar stools in a project live under mixed lighting, not under a light box.

Height decides everything: 650 mm seat for a 900 mm bar top, 750 mm for a 1050 mm counter. Get it wrong by 50 mm and the sitter either perches or cannot reach the top. Kitchen islands in apartments are the fastest growing part of this category.

Keeping colour honest in service

Cleaning chemicals and sunlight move colour over the years; the aftercare sheet says which agents are safe so the panel match survives the venue.

Seat blanks for stools are small and they take water back quickly if they stand in an open yard. They move from the kiln to a covered store and are machined within the week, because a 25 mm blank has very little reserve.

Questions

Can you match Pantone or RAL?

On stained timber we match to a physical panel, not a number; send the target and we sign off a stained bar stool panel first.

Why does my sample look different at night?

Lighting. We check panels under two sources so the match survives the venue, not just the showroom.

Do touch-up supplies ship with the order?

Yes - stain and finish touch-up for the order ships with the first carton.

How consistent is colour across 300 pieces?

One stain batch per order plus panel checks in the booth; variation stays inside what a sealed panel defines.