Twelve-hour days, nightly scrubbing and hourly re-arranging - which bar stool specifications survive real café service.
A café is a turnover problem
Café seating works 12 hours a day, gets scrubbed nightly and is re-arranged hourly. The right bar stool here is not the prettiest one - it is the one whose wear points survive that routine.
Height decides everything: 650 mm seat for a 900 mm bar top, 750 mm for a 1050 mm counter. Get it wrong by 50 mm and the sitter either perches or cannot reach the top. Kitchen islands in apartments are the fastest growing part of this category.
What actually breaks in cafés
Front seat edges, levelers and finish under cleaning agents - in that order. Specifications that survive cafés are written around those three, not around showroom looks.
The three returns we see: footring welds cracking after a season, swivel mechanisms that lose their gas, and seat pads compressed flat at the front edge. All three are specifiable — a closed-section ring, a contract-rated lift, and a 35 kg/m³ foam.
Seat blanks for stools are small and they take water back quickly if they stand in an open yard. They move from the kiln to a covered store and are machined within the week, because a 25 mm blank has very little reserve.
| Item | What to check | Why |
|---|---|---|
| Wear points | Front edge, levelers, finish | Specified above catalogue average |
| Cleaning | Agents agreed up front | Aftercare sheet ships with order |
| Layout | Stacking if floor re-sets daily | Engineered, not improvised |
| Comfort window | 12 h days | Firmer foam than home |
| Reorder path | Fixture sets kept | Repeat orders match |
Café seating checklist
Stacking and re-arranging
If the venue re-sets the floor daily, stackability and frame protection matter more than anything on the mood board. Stacking bar stools are engineered differently and priced differently.
A stool carries its load differently from a chair. The seat is high, the base is narrow relative to the height, and the footring takes a sideways kick every time someone climbs on or pushes off. That is why the ring on our stools is a welded closed section joined to the column, not a ring screwed into a leg.
The cleaning contract
Covers and finishes should be chosen with the cleaning list in hand; the aftercare sheet ships with the order so the nightly routine matches the material.
Seats are the part that fails first on a stool. Leather and velvet covers around 26 of the 88 models take a knee-slide load that a dining chair never sees, so the seam is placed away from the front edge and the foam is wrapped rather than loose.
Seat blanks for stools are small and they take water back quickly if they stand in an open yard. They move from the kiln to a covered store and are machined within the week, because a 25 mm blank has very little reserve.
Ordering for a café fit-out
The most common order quantity in this category is 6 pcs (36 models ship at that level).
Mid-range references cafés reorder most: by-62565 (Leather/Velvet/Fabric, MOQ 6 pcs), A001 (100% Solid Wood, MOQ 2 pcs), A10035 (Solid Wood, MOQ 4 pcs).
Reference
Questions
How many bar stools do I need for a 40-seat café?
Seating counts follow the floor plan; what we can promise is that the models you pick reorder identically a year later.
Do café bar stools need special finishes?
A cleaning-resistant finish system, yes - it is a specification choice, not an upgrade.
What MOQ applies to a fit-out?
The most common order quantity in this category is 6 pcs (36 models ship at that level).
Can I visit the line before ordering?
Yes - buyers are welcome in Longjiang, and a café buyer should see the wear-point inspections in person.