Guangdong Chair Factory Notes Production floor, Longjiang · Foshan

Factory Notes › Wooden Lounge Chairs

Lounge Chairs for Banquet Halls: Stacking, Uniformity, Waves

Five hundred seats stored Monday, seated Saturday - the engineering and logistics behind banquet-grade lounge chairs.

Updated 2026-10-20Longjiang, Foshan11 min read

Five hundred seats stored Monday, seated Saturday - the engineering and logistics behind banquet-grade lounge chairs.

These notes come off the production floor in Longjiang, Foshan. The current wholesale wooden lounge chairs range is on the main site, with a specification page for every model in it.

Banquet seating is logistics wearing furniture

A banquet hall stores 500 lounge chairs on Monday and seats 500 guests on Saturday. Uniformity, stackability and repair-ability outrank every aesthetic question.

Hotel lobbies, waiting areas, senior living, reading corners. Seat height 400 to 430 mm with the back raked further than a dining chair, because the sitter is resting rather than eating. A side table at 350 to 400 mm goes with it.

Stacking is engineering

Stack loads, leg alignment and protective spacing are designed in, not discovered on site. A lounge chair that stacks ten high needs frames that stay square after a hundred stacks.

A lounge chair is a soft seat on a frame, not a frame with a pad. 220 of the 226 models in this category are upholstered, so the frame is a substrate: it has to hold the foam and the cover in shape under a sitter who stays put for an hour, not one who leaves in twenty minutes.

ItemDesign pointService reality
StackingDesigned loads + spacingSquare after 100 stacks
UniformityOne fixture setNo wobble at table nine
StorageCartons for racks/trolleysPads counted as parts
WavesRetained samples keptSeason re-orders match
RepairServiceable jointsVenue team can fix

Banquet checklist

Uniformity across hundreds

Guests notice wobble at table nine. One fixture set runs the whole order and the in-run gauge keeps lounge chair number 480 as square as number 8.

Most of the frame here is machined for fit rather than for appearance: rails at 30 to 40 mm, a shaped ply or webbed seat deck, and no exposed joinery worth naming. Tolerance matters where the cover meets the frame, not where the eye looks.

Comfort testing counts as much as strength here: foam compression set under repeated loading, cover abrasion, and a frame fatigue test at Level 1 or Level 2 depending on the traffic the lobby actually sees.

Storage and transport

Cartons are sized for trolley lanes and storage racks, and the packing list counts protective pads as seriously as frames - storage damage is banquet damage.

The bulky end of the catalogue: 0.22 to 0.34 m³ per carton, one piece, fully assembled. Freight dominates the landed cost, which is why buyers consolidate them with flatter models. MOQ is 4 pieces, and 2 on some models.

Through the season

Banquet houses re-order in waves before event seasons; retained samples and kept fixtures mean wave two matches wave one.

Frames for upholstery go straight from the conditioned store to machining, because a frame that has picked up moisture will move after the cover is fitted — and a cover hides that movement until the seam splits.

References banquet buyers reorder: GDC-5652 (Velvet/Fabric/Leather, MOQ 2 pcs), GDC-5652 (Velvet/Fabric/Leather, MOQ 4 pcs), GDC-5652 (Velvet/Fabric/Leather, MOQ 4 pcs).

Questions

What MOQ applies to banquet orders?

The most common order quantity in this category is 4 pcs (144 models ship at that level).

Do banquet lounge chairs need special frames?

Stack-rated frames with reinforced junctions - a standard frame stacked nightly will not survive a season.

Can waves ship months apart?

Yes, fixtures and retained samples are retained so later waves match.

What about venue repairs?

Serviceable joints and a spare kit per carton; the venue team handles most repairs without the factory.