Guangdong Chair Factory Notes Production floor, Longjiang · Foshan

Factory Notes › Restaurant Chairs

Restaurant Chairs for Small Apartments and Compact Dining

Tape-measure-first buying: dimensions, visual weight and low MOQs for restaurant chairs in compact homes.

Updated 2026-10-15Longjiang, Foshan11 min read

Tape-measure-first buying: dimensions, visual weight and low MOQs for restaurant chairs in compact homes.

These notes come off the production floor in Longjiang, Foshan. The current wholesale restaurant chairs range is on the main site, with a specification page for every model in it.

Small rooms punish the wrong dimensions

Apartment restaurant chairs are bought first with a tape measure: seat height against the table, arm width against the doorway, depth against the room. The catalogue's millimetre columns exist for exactly this buyer.

Restaurants, cafés, bistros and hotel dining rooms — the largest category we build, 490 models. Stacking four to six high is common because rooms get re-set, and a stackable frame is a different engineering job from a knock-down one.

Visual weight matters as much as mass

Slim legs, open backs and lighter finishes keep a small dining corner breathing; the same timber in a heavier profile reads as clutter. Frame choice changes the room before it changes the price.

Ash carries most of this programme and rubberwood covers the rest, both bought to a specification that assumes contract service: ash where the frame takes a daily racking load, rubberwood where the price point has to work.

A restaurant chair is specified for turnover, not for comfort in the abstract. It gets sat in hard, dragged across a floor and wiped down several times a day. Frames are built to EN 16139 Level 2 and the seat is designed to survive cleaning, which rules out a lot of domestic construction.

CheckLook atWhy
DimensionsSeat height / depth / widthTape measure first
Visual weightSlim legs, open backsRoom reads bigger
Multi-useDesk and entry dutyFirmer seat
MOQLow-entry ladderSmall orders welcome
DeliveryFlat-ish packingStairs and lifts

Apartment checklist

Multi-use seating

In compact homes the restaurant chair also works from a desk or an entryway bench, so seat height and edge comfort matter beyond dinner. Firmer is usually friendlier here.

Covers are chosen for cleanability: PU, leather and tight-weave fabric, abrasion 30,000 rubs and up. A restaurant that cannot wipe a seat down in ten seconds will not keep it in service for a year.

Small orders are real orders

Apartment buyers order few pieces - the same fixtures run a 6-piece order as a 600-piece one, and the MOQ ladder starts low on purpose.

Stackable models are assembled to a tighter squareness tolerance than a domestic chair, because a stack of six that does not sit true puts a permanent twist into the frames at the bottom. The jig is checked per run, not per season.

The most common order quantity in this category is 6 pcs (409 models ship at that level).

Compact picks from the range

Representative models with dimensions and MOQs: XY-24018 (Solid wood, MOQ 6 pcs), A00105 (100% Wood, MOQ 6 pcs), A005 (Solid wood, MOQ 6 pcs).

Questions

What is the minimum order for restaurant chairs?

The most common order quantity in this category is 6 pcs (409 models ship at that level).

Which models suit a small dining corner?

Send the room dimensions; the catalogue's millimetre columns narrow it to two or three restaurant chairs models fast.

Is a lighter finish better for small rooms?

Usually - visual weight is a real effect; the colour panel decides the rest.

Can apartment orders be mixed across categories?

Yes - mixed-container orders are normal and priced on the same production plan.