Guangdong Chair Factory Notes Production floor, Longjiang · Foshan

Factory Notes › Solid Wood Dining Chairs

Dining Chairs for Small Apartments and Compact Dining

Tape-measure-first buying: dimensions, visual weight and low MOQs for dining chairs in compact homes.

Updated 2026-10-15Longjiang, Foshan11 min read

Tape-measure-first buying: dimensions, visual weight and low MOQs for dining chairs in compact homes.

These notes come off the production floor in Longjiang, Foshan. The current wholesale solid wood dining chairs range is on the main site, with a specification page for every model in it.

Small rooms punish the wrong dimensions

Apartment dining chairs are bought first with a tape measure: seat height against the table, arm width against the doorway, depth against the room. The catalogue's millimetre columns exist for exactly this buyer.

Home dining rooms, apartments and showrooms. Seat height 450 to 470 mm against a 720 to 750 mm table, seat depth 400 to 450 mm. Standard is domestic use under EN 12520, with EN 16139 Level 1 available where the chairs go into a serviced space.

Visual weight matters as much as mass

Slim legs, open backs and lighter finishes keep a small dining corner breathing; the same timber in a heavier profile reads as clutter. Frame choice changes the room before it changes the price.

Around 70% of what we run is ash and roughly 30% rubberwood, and both appear in this category's charge book. Ash dries steadily and holds its colour; rubberwood dries fast and evenly. Both are metered the same way.

A dining chair is a four-legged frame that takes almost its entire load through the two front legs when someone sits down hard or pushes back from a table. The front leg to side rail joint is the one that decides whether the chair is tight after five years. We cut it as a mortise and tenon with a corner block.

CheckLook atWhy
DimensionsSeat height / depth / widthTape measure first
Visual weightSlim legs, open backsRoom reads bigger
Multi-useDesk and entry dutyFirmer seat
MOQLow-entry ladderSmall orders welcome
DeliveryFlat-ish packingStairs and lifts

Apartment checklist

Multi-use seating

In compact homes the dining chair also works from a desk or an entryway bench, so seat height and edge comfort matter beyond dinner. Firmer is usually friendlier here.

Roughly two thirds of this category is a solid wood frame with a wood seat; the rest carries a padded seat or a woven seat. Covers on the padded models are cut to a nested marker so a repeat order matches the original run.

Small orders are real orders

Apartment buyers order few pieces - the same fixtures run a 6-piece order as a 600-piece one, and the MOQ ladder starts low on purpose.

Frames go together on a jig that holds the seat square while the glue cures. Clamp time is fixed to the adhesive specification, and the corner blocks are both glued and screwed rather than one or the other.

The most common order quantity in this category is 6 pcs (221 models ship at that level).

Compact picks from the range

Representative models with dimensions and MOQs: A073 (100% Solid Wood, MOQ 6 pcs), A00114 (100% Wood, MOQ 4 pcs), A005 (Rattan/solid wood, MOQ 6 pcs).

Questions

What is the minimum order for dining chairs?

The most common order quantity in this category is 6 pcs (221 models ship at that level).

Which models suit a small dining corner?

Send the room dimensions; the catalogue's millimetre columns narrow it to two or three solid wood dining chairs models fast.

Is a lighter finish better for small rooms?

Usually - visual weight is a real effect; the colour panel decides the rest.

Can apartment orders be mixed across categories?

Yes - mixed-container orders are normal and priced on the same production plan.